How To Setup Ivacy VPN Manually on Mac
 

Before you begin, please make sure that:

You can select the respective tab for the desired protocol.

  1. Open “System Preferences”.VPN Configure on Mac
  2. Go to “Network”.System Preferences for VPN
  3. Now click on “+” button on the bottom left.Network Sttings on Mac
  4. In the “Interface” field, select ‘VPN’, enter the name e.g. ‘Ivacy PPTP’ in Service name and hit “Create”.Selecting PPTP for VPN
  5. In the “Account Name” field, enter your ‘Ivacy username’ (the email address and the password are the same that you chose at the time of order placement). In “Server Address” field, enter your desired server address (the list of all server addresses can be found here) and click on “Authentication Settings”.
  6. In a new window, enter your ‘Ivacy Password’ (found in Configuration email) and click “OK”.
  7. Now Click “Apply” and open “Advanced settings”.
  8. Check “Send all traffic over VPN connection” and click “OK”.VPN Settings on Mac
  9. Now Click on “Apply” again and click “Connect” and enjoy Privacy with “Ivacy”.
  1. Open “System Preferences”.VPN Configure on Mac
  2. Go to “Network”.System Preferences for VPN
  3. Now click on “+” button on the bottom left.Network Sttings on Mac
  4. In “Interface” field select ‘VPN’, select ‘L2TP Over IPSec’, enter the name e.g.  ‘ivacy (L2TP)’ in “Service name” field and hit “Create”.Selecting L2TP for VPN
  5. In “Account Name” field, enter your Ivacy ‘username’ (found in configuration email). In “Server Address” field, enter your desired server address (the list of all server addresses can be found here) and click on “Authentication Settings”.Configure VPN in Mac
  6. In a new window, enter your ‘Ivacy Password’ (found in configuration email) and enter ‘12345678’ in ‘Shared Secret Field’.VPN redentials in Mac
  7. Now Click on “Apply” and open “Advanced settings”.Congigure VPN in Mac
  8. Check “Send all traffic over VPN connection” and click “OK”.VPN Settings on Mac
  9. Now Click on “Apply” again, click on “Connect” and enjoy Privacy with Ivacy.Connect VPN n Mac
  1. Open “System Preferences”.
  2. Go to “Network”.System Preferences for VPN
  3. Now click on “+” button on the bottom left.Network Sttings on Mac
  4. In the “Interface” field, select ‘VPN’, enter the name e.g. ‘Ivacy IKEV2’ in Service name and hit “Create”.
  5.  Select Ivacy IKEV2 > Authentication Settings. Enter your Ivacy credentials in their respective fields.
  6. Enter the server address of the VPN server you want to connect to, the entire list can be found here. Then simply click Connect.

That’s it! You have successfully configured Ivacy VPN. Enjoy complete privacy with Ivacy.

Was this helpful?

Leave a Reply

Your email address will not be published.