EXPIRES IN:
Get Ivacy Now

7 Days Money Back Guarantee

How To Setup WiFi Ivacy VPN Hotspot on Windows Manually?

1341 views July 7, 2016 July 26, 2016 admin 6

In this article, you will learn about the manual configuration of Ivacy VPN as a hotspot for your system, using a Windows Operating System, for connecting Apple TV, XBox, Roku, Wii PS3 and PS4 consoles. The procedure is quite simple. Once configured, you can use your Ivacy VPN hotspot to access anything over the internet.

Before going into further details, please ensure that you have a properly functioning internet connection. Do make sure that the device you have, supports Windows Operating System. Also, ensure that you have an Ivacy account for this purpose. (If you haven’t bought an Ivacy account as yet, subscribe now). By following the steps mentioned in this article, you can easily setup a VPN hotspot that supports all protocols, including PPTP, L2TP, OpenVPN etc.   

Without further delay, let’s start! To manually configure Ivacy VPN Wifi Hotspot, you have to follow these steps.

Step 1

Connect your system (Personal Computer) with the Ethernet cable, and check whether your internet connection is working or not.

Step 2

Go to ‘Start’ and type ‘cmd’ in the search box.

Windows Start Menu

 

Step 3

Right click on ‘cmd’ and select ‘Run as Administrator’ from the menu. If there is a need to provide the password, use the admin password to continue. Click ‘Yes’.

Windows Start Menu 2

 

Step 4

On the black screen, known as ‘command prompt’, type the command, ‘netsh wlan show drivers’. Hit ‘Enter’.

The screen will give you information about ‘drivers’. Look out for ‘Hosted Network Supported’. If the hosted network supported is set to ‘Yes’, you can continue.

Windows-cmd-command-for-vpn-hotspot

 

Step 5

Type the command, netsh wlan set hostednetwork mode=allow ssid=ivacy key=password’, and press the ‘Enter’ key. Your WiFi Network is established. Select a WiFi connection name and a password that you desire to use on this connection. For instance:

  • Wifi Connection Name = ssid
  • Your Desired Password = key

Windows-cmd-command-for-vpn-hotspot-2

 

Step 6

Now type the command, ‘netsh wlan start hostednetwork’ and start your hosted WiFi Network.

Note: If you get the error message, ‘The hosted network couldn’t be started’, go to ‘Network Sharing Center’ and enable the ‘Microsoft Virtual Wifi Miniport Adapter’ and try again.

Windows-cmd-command-for-vpn-hotspot-3

 

Step 7

Right click on ‘Wireless Network Connection, (Microsoft Virtual WiFi Miniport Adaptor)’icon and go to ‘Properties’.

Network and sharing settings

 

Step 8

Click on ‘Sharing’ tab and select ‘Allow Other Network User to connect through this computer’s Internet connection’. Now select the Microsoft Virtual Wifi Miniport Adapter (Wireless network connection), from the dropdown menu, and select ‘Allow other network users to control or disable the shared Internet connection’. Click ‘OK’. Here you go! Your Ivacy WiFi Hotspot connection is ready.

 

Ivacy PPTP properties for vpn hotspot

 

Step 9

Connect to Ivacy VPN. Now you can connect any of your devices to your Ivacy VPN WiFi Hotspot.
Enjoy Privacy with Ivacy VPN.

Was this helpful?

Leave A Comment

*
*